Dake Corporation
1809 Industrial Park Dr
Grand Haven, MI 49417
977600-1V
10
REV012021
CONTROLS
Emergency Stop Button:
When this is pressed the power to the motor and controls is
disconnected.
Spindle Direction:
Turn the spindle direction switch to the desired direction forward, reverse, or
stop. If the emergency stop button is pushed or if the power is lost you will have to move this to
stop (to reset) then to desired spindle direction.
Stop:
This is used when you would like the spindle to stop.
Forward:
This is used for standard drilling and tapping operations.
Reverse:
This is used for left-hand tapping and to retract a tap during tapping operations.
Spindle Speed:
The black dial in the upper right-hand corner controls the spindle speed. This
will change the speed in forward and reverse direction.
WARNING:
Avoid stopping the
motor under load or stalling the motor. This could damage the electrical components.
