Laguna Tools DAKE JH10W1, Instructional Manual

Page: 21 / 26

Dake Corporation
1809 Industrial Park Dr
Grand Haven, MI 49417
www.dakecorp.com
985017/985018 20 REV122021
OTHER VOLTAGE MODELS
Bandsaw Sub-Assembly same for 985017-1, 985017-2, 98518-2, & 985018-4.
Parts that differ from 110V Model below:
985017-2 220V Single Phase Model
Part Name Part Number Qty
Motor, 110/230 Volt, 60 Hz Single-Phase, 1 H.P.
10079-07 1
Wire Nut
300171 4
16-14 Wire #10 Stud Non-Insulated Ring Terminal
300245 4
Wire Tie
300246 8
Quick Connect Terminal
300524 3
Electrical Control Box Assembly
716676 1
Flexible Conduit Assembly
716679 1
Connector, Cord
75151 1
Locknut, Conduit, 1/2 In.
75257 1
Roll Pin (1/4” x 2-1/2”)
75516 4
985018-2 220V 3-Phase Model
Part Name Part Number Qty
Motor, 208/230/460V, 50/60 Hz. 3-Phase
10079-05 1
Wire Nut
300171 5
16-14 Wire #10 Stud Non-Insulated Ring Terminal
300245 4
Wire Tie
300246 3
Quick Connect Terminal
300524 3
Electrical Control Box Assembly
716677 1
Flexible Conduit Assembly
716680 1
Connector, Cord
75151 2
Locknut, Conduit, 1/2 In.
75257 2
Roll Pin (1/4” x 2-1/2”)
75516 4
985018-4 440V 3-Phase Model
Part Name Part Number Qty
Motor, 208/230/460V, 50/60 Hz. 3-Phase
10079-05 1
Wire Nut
300171 5
16-14 Wire #10 Stud Non-Insulated Ring Terminal
300245 4
Wire Tie
300246 3
Quick Connect Terminal
300524 3
Electrical Control Box Assembly
716678 1
Flexible Conduit Assembly
716680 1
Connector, Cord
75151 2
Locknut, Conduit, 1/2 In.
75257 2
Roll Pin (1/4” x 2-1/2”)
75516 4