START-UP AND USING THE INTERFACE
*
Put all of the ingredients in the glass bowl without going beyond
the last graduation (
1500
ml).
*
For a homogeneous mixture, put the liquid ingredients in first
and then add the solid ingredients.
*
Place the lid on the glass bowl, push it down firmly and turn
clockwise to lock it in place. Make sure that the notches on the
lid are correctly positioned in the bars on the sides of the glass
bowl. Don't forget to put the measuring cap in the hole in the
lid by placing the bars in the lid's notches, then lock it in place
by turning it clockwise.
*
Plug the device.
*
The three "function" buttons will then light up. They will flash
when you remove the bowl from the base.
*
Switch on the device by turning the speed control to the right
and activating the "on" function.
*
Adjust the speed by turning the control clockwise for accelerating
to maximum speed or counter-clockwise to slow down until
arriving at the off position.
*
The "function" buttons cannot be used simultaneously with the
speed control.
*
You can use the "Symbol - Blade" button with the "manual" function.
Each press will produce the maximum speed, likewise when the
button is pressed and held.
*
You can use the button with the "manual" function. Each press
will produce the maximum speed, likewise when the button is
pressed and held.
*
You can use the
button with the "crushed ice" function.
The program alternates between full speed and pauses,
stopping automatically after
60
seconds. However, you can stop
the program before by pressing the same
button.
*
You can use the button with the "drink" function to make all your
smoothies, iced coffees, milkshakes or other drinks. The program
will run for
60
seconds at full speed and will stop automatically.
However, you can stop the program before by pressing the same
button.
*
To add ingredients during the mixing, remove the measuring
cap located on the cover and insert the ingredients through the
opening of the cover.
*
Do not use the device for more than
1
minute at maximum speed
with the glass bowl or the grinder. Take a
10
second break after
a one-minute cycle.
*
Be careful to cut meat and solid foods into pieces before putting
them in the blender. If you must mix large quantities of foods,
do so progressively, in small portions.
*
Always stop the unit before opening the cover.
50
