FLIP
®
01.01.2019
English / Englisch
MAINTENANCE WORK AND REPLACEMENT OF WEARING PARTS
7
Conduct a trial sanding operation and check the sanding
results.
8
If the machine sands
centrically
(fig. 59), the guide rollers
are properly adjusted.
9
If the machine sands too much to the right (fig. 60) or to the
left (fig. 62), the guide rollers are
not adjusted to the same
height
(fig. 61 and fig. 63)!
10
Adjust both guide rollers to the
same height
(
steps 1 to 6
)
and repeat the trial sanding operation.
7
Fig. 62
Improper adjustment of the guide rollers:
The sanding zone of the machine is too much to
the
left
.
Fig. 60
Improper adjustment of the guide rollers:
The sanding zone of the machine is too much to
the
right
.
Fig. 59
Proper adjustment of the guide rollers:
The machine sands
centrically
.
Fig. 61
The sanding zone of the machine is too much to
the
right
:
The
left
guide roller is lifting the machine too
much.
Fig. 63
The sanding zone of the machine is too much to
the
left
:
The
right
guide roller is lifting the machine too
much.
39