LAFEME SESTO ST22, Instruction Manual

Page: 17 / 24

Flow adjusting
※ Under rear mode or bidet mode, press plus button will increase the water
flow, press minus button will decrease the water flow. Total 5 settings, and
corresponding indicator will on under different setting.
Seat temperature adjusting
※ Seat heated after seated, press plus button will increase seat temperature, press
minus button will decrease seat temperature. Total 4 settings(including seat
temp. off choice), and corresponding indicator will on under different settings.
※
To activate or stop the beep sound:
In the non-seated state, push the side
button back for more than 5 seconds to
activate or stop the beep.
※Tips:
When you sit for a long time, please adjust the seat temp to ambient or low temp; After a while, the toilet
itself also will auto reduce the temp to prevent users' low temp scald; After leaving the seat, the flushing
function will auto on.
-14-
Posterior & Feminine cleaning function show:
Function 1: Press posterior/feminine cleaning button to start
clean hip/women′s private parts.
Function 2: Under posterior/feminine cleaning mode, press
relevant button again to stop cleaning.
Function 3: Hold down posterior/feminine cleaning button to
be run below mode:
Posterior/feminine cleaning→ massage cleaning→dry→stop
※Remark: Users can turn on/off the night light function when
not seating on the toilet.
Dry function show:
Function 1: Press the dry button to start drying the moist parts
with warm air.
Function 2: Under dry mode, press the dry button to stop
drying.
Push button function show:
Function 1: Under posterior/feminine cleaning mode, push
forward the side button to adjust the position of
the nozzle ;( default setting is 3, total 5 settings)
Function 2: Under posterior/feminine cleaning mode, push
forward the side button to adjust volume of
water;(default setting is 3, total 5 settings)
※Remark: The way to switch the above two functions is to
hold the dry button more than 2 seconds, the
function switch successfully after it sounded“Di”.
Function 3: Under the dry mode, push forward the side button
to adjust temperature; (default setting is 3, total 5
settings)
Function 4: Auto flush function is on by default. You can turn
it off by pressing “dry” on the push button for 5
sec., after a beep sound, auto flush will be off.
Side push button instruction
Posterior cleaning button
Button (the button moves backward
or forward)
Dry button
Feminine cleaning
button