background image

These are compulsory requirements

Below items are prohibbted

Please do not use a loose power connection,or it may cause electric shock or cause fire.

Always use the specified supply voltage (240VAC, 50Hz), it is necessary to install a circuit 

breaker. 

Please do not spray  detergent, water, cleaning agent in or around the power supply, this may 

cause electric shock or fire. 

Recommended water pressure is between 100-500Kpa 

Recommended water temperate is between 4-35°C  

Use only Watermark approved flexible hoses for this installation.

Prior to the installation,a suitable electrical connection should be available,according to the 

current local legislation. 

Standing on the seat, using the seat for a plank or any use outside of a typical weight not evenly 

distributed can cause damage to the seat and will void the warranty. The washlet must be installed 

by recogni

zed professional tradespeople. i.e. Plumber and Electricians.

Use only mild detergent and a soft cleaning cloth for cleaning the seat and surrounding pan,

(Enjo or similar micro fibre cleaning products are suitable) Typical toilet cleaning procedures 

for inside pan are suitable. Bleach or chlorine-based products should not be left inside the pan 

with the seat shut or for prolonged periods.

WARNING

It means that if you ignore this sign

It may cause personal injury or property damage

Do not attempt to disassemble and/or repair the product without authorization, any work by 

non-professionals will void the warranty and may cause damage to the product.

In order to 

avoid

 injury and property loss, please follow the safety warnings and 

precautions. Read this manual carefully before installation, and then install it 
accordance with the instructions. After you 

have

 

finished

 reading, please keep 

the instructions for the end user.

Safety precautions

WARNING

Make sure that this product is correctly attached to a grounded connection. (If the product 

 is not  grounded, it may introduce the risk of electric shock)

Rainwater, demineralized water, sea water or grey water are not suitable to operate this 

equipment. Operate with normal drinking water only.

-1-

Summary of Contents for SESTO ST22

























Reviews: