![background image](http://html.mh-extra.com/html/caroma/smart-one-piece-989100/smart-one-piece-989100_installation-instruction_2559567001.webp)
Smart One Piece 1.28/0.8
gpf (4.8/3 lpf) Easy Height
Elongated Toilet with Side
Lever
#989100
#989100-R
Vitreous China Dual Flush
High Efficiency (HET)
Washdown Toilet
PLUMBERS INSTALLATION INSTRUCTIONS. PLEASE
READ CAREFULLY BEFORE INSTALLATION.
Rough in:
It is possible to fix the toilet into
10” (255mm) or 12” (305mm)
rough in positioins by rotating the offset adaptor.
IMPORTANT:
Reducing wax ring MUST NOT be used when installing this
toilet bowl as detailed in Fig.2.
Working Water Pressure:
USA & Canada: Recommended working water pressure is
20-80psi (140-550Kpa).
Installation Procedure:
1. It is important for the installation of Caravelle Smart 1 PC
Washdown toilet that the closet flange be accurately set out
from the finished wall as detailed in Fig.3.
2. Position wax seal and offset adaptor onto
“T” bolts as
detailed in Fig. 4 and 5, ensuring that the offset adaptor is
positioned for
10” (255mm) or 12” (305mm) rough in as
detailed in Fig.1.
3. Place fixing bracket onto
“T” bolt and secure it by hand
tightening nuts and washers onto the
“T” bolts. Apply an
additional turn for final installation as detailed in Fig.5.
4. Ensure that the area around the closet bowl is clean and
free from building materials.
5. Accurately align the closet bowl over the offset adaptor
and lower into position.
6. It is recommended that a bead of silicone caulking is
applied fully around base of the closet bowl.
7. Remove any excess silicone caulking.
8. Insert the plastic bushing and brass bushing into the Bowl
fixing hole as shown in Fig.6. Secure the bushings through
the holes in fixing bracket with SS screws as shown in Fig. 7.
Cover the holes with caps.
Fixing Bracket Assembly
Standard Wax Bowl
Ring
Reducing Wax Bowl
Ring
Fig.2
Finished Wall
Closet Flange
Fig.3
Finished Wall
'T' Bolt
Closet Flange Wax Seal
Fig.4
Finished Wall
Adaptor
Fig.5
Fixing
Bracket
Fixing
Bracket
Fig.7
Caravelle Bowl
Cap
Plastic
Bush
Brass Bush
SS Screw
Fig.6
10-
3/4”
(272mm)
5-
1/2”
(140mm)
14-
1/8”
(360mm)
3/4”
(20mm)
11" (280mm)
10”(255mm)
12”(305mm)
Fig.1
6
-7/
8
”
(1
7
5
m
m
)
16
-1
/2
”(
4
20
m
m
)
18
-1
/2
”
(4
7
0
m
m
)
1
3
/1
6
”
30
-3
/8
”(
7
7
0
m
m
)
a
p
p
ro
x.
(2
0
m
m
)
29
-1
5
/1
6
”
(7
6
0
m
m
)
1
8
”(
4
5
5
m
m
)
to
t
o
p
o
f
s
e
a
t
21
-1
/4
”
(5
4
0
m
m
)
2"
(5
0m
m
)