laerdal Resusci Anne Simulator, Directions For Use Manual

Page: 13 / 65

13
Supplemental Oxygen On/Off
On the main display, using the left/right navigation buttons highlight
the Set Breathing Rate functional area.
Press OK to activate the Set Breathing Rate menu or change sup-
plemental oxygen status “ On/Off ” directly from the quick execution
button.
Use the left/right navigation buttons to select the O
2
Supplied menu.
Use the up/down navigation buttons to toggle between “ On/Off ”.
Press OK to activate your selection and to return to the main
display.
Turn Off Remote Control and Simulator
When the remote control is turned off a window will appear asking
whether or not the user would also like to turn off the simulator.
Use the “Yes” or “No” quick execution buttons to make the appro-
priate selection. This function helps to save battery life in the
Simulator.
Maintenance
Preventive maintenance is the best method of ensuring long and
trouble free operation. A general inspection should be conducted at
regular intervals.
Periodic cleaning
Periodically wash all skin parts that are not regularly sanitized during
and after each class, using warm soapy water or Virkon.
Outer skin and moulded hair
Most stains can be removed with alcohol or warm water and soap.
However, the older the stains are, the more difficult they are to
remove. Nonabrasive household cleaners that are safe for plastics
may produce desirable results. It is wise to test other cleaning agents
on a non-critical area, e.g., under the chest cover, before general
use. Note that pigments from lipstick and ballpoint pens quickly trav-
el into the plastic skin. Such stains may be impossible to remove.
Clothes
Hand or machine wash with soap or laundry detergent in warm
water, max. 40°C (100°F). Iron with warm iron. May be dry cleaned.
Please note that hot air dryer may cause garment shrinkage.
Changing the pupils
The simulator is delivered with a set of eyes containing normal
pupils mounted in the head. A separate case contains 3 sets of plast-
ic eye inserts (normal, constricted and dilated pupils) for use in
simulating other conditions. To change the pupils in the airway head:
1. Remove the hair from the airway head by pulling back
on the hair piece.
2. Detach the top of the face skin and fold back until
the eyes are exposed.
3. With a thin blunt object, for example a screw driver, place the tip
into the groove under the eye insert, and pull up to detach
the eye from the skull
4. To insert the new eye position it in eye hole of the scull
and press in until it snaps into place.
5. Reattach face and hair by reversing points 1 & 2 above
Attaching the Airway Head
In the event that the airway head needs to be removed or re-
attached to the simulator’s torso perform the following:
1. Detach the simulator’s chest skin by pulling the skin away
from the tabs
2. Carefully lay the skin to the side being careful not to apply
excessive force to the cable attachments
ENGLISH
Set Airway Parameters
Turn off
Yes No
Turn off simulator too?
O
2
Supplied
OFF
Chest Rise
ON
Airway
Open
Breathing
Rate
14
Set Apnea
–
BR
+
A: Sinus 80
No Waiting Rhythm
De fi b. Enabled
BP: 120 / 80 P: N 4
L.Lung: Normal 4
R.Lung: Normal 4
Heart: Normal 4
Vocal: Cough 4
Breathing Rate: 12
00:00 Logging [Logname]
Set Apnea Set Mode Set O
2
A