36/54
Mounting and operating instructions Electric transporter BLACK LINE
Assembly
Hanging trough mounting on profile bar
Mounting requirements:
The electric transporter is properly mounted.
The profile bar is properly mounted.
Required mounting material:
Hanging trough mounting
kit article number 2299.69.10.40
(See chapter 5.3 "Mounting material" on page 22).
FIBRO GMBH recommends that all screws be provided with medium-strength thread lock.
1. Insert the sliding blocks into the grooves of the profile bar and pre-position them.
2. Mount the mounting bracket on the trough.
3. Position the trough over the sliding blocks, insert the cylinder head screws and hand-tighten.
4. Position the trough on the profile bar and tighten the cylinder head screws crosswise.
5. Position the trough in the desired position in the retaining brackets and clamp with the
clamping screws.
Fig. 5-19 Hanging trough mounting on profile bar
The trough is mounted.
