inhibited (IISM=NON). The activation of Group
II
is signalled by the lighting up of the relevant LED on the controller display.
9.2
You select the sensor type for the measurement of temperatures T1 and T2 through the parameter
INP
. With INP=SN4 probes T1
and T2 must be the LAE models NTC SN4.. and with INP=ST1 the probes must be the LAE models PTC ST1.. With INP=ST1 you can
only choose the scales with 1° resolution (SCL=2°C or SCL=°F).
WARRANTY
LAE electronic SPA guarantees its products against defects due to faulty materials or workmanship for one (1) year from the date of manufacture shown on the container.
The Company shall only replace products which are shown to be defective to the satisfaction of its own technical services. The Company shall not be under any liability
and gives no warranty in the event of defects due to exceptional conditions of use, misuse or tampering.
LAE electronic does not accept units back unless LAE electronic has previously given its allowance or request.
INSTRUCTIONS FOR INSTALLATION AND USE.
