Lacrosse 2015 Buick Owner'S Manual Download Page 220

Page: 220 / 407

Black plate (35,1)

Buick LaCrosse Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7707475) - 2015 - CRC - 10/9/14

Driving and Operating

9-35

comes on and stays on:

1. Stop the vehicle.

2. Turn the engine off and wait

15 seconds.

3. Start the engine.

Drive the vehicle. If

comes on

and stays on, the vehicle may need
more time to diagnose the problem.
If the condition persists, see your
dealer.

Turning the Systems Off
and On

The TCS/StabiliTrak button is on the
center console.

{

Caution

Do not repeatedly brake or
accelerate heavily when TCS is
off. The vehicle driveline could be
damaged.

To turn off only TCS, press and
release the

button. The traction

off light

displays in the instrument

cluster. The appropriate DIC
message displays. See

Ride Control

System Messages on page 5-42

To turn TCS on again, press and
release the

button. The traction

off light

displayed in the

instrument cluster will turn off.

If TCS is limiting wheel spin when
the

button is pressed, the system

will not turn off until the wheels stop
spinning.

To turn off both TCS and StabiliTrak,
press and hold the

button until

the traction off light

and

StabiliTrak OFF light

come on

and stay on in the instrument
cluster. The appropriate DIC
message displays. See

Ride Control

System Messages on page 5-42

Summary of Contents for 2015 Buick
























































































































































































































































































































































































































Search results

Summary of Contents for 2015 Buick

Reviews:

Related manuals for 2015 Buick

Brands by name

Popular brands

Lacrosse 2015 Buick, Owner'S Manual

Search results

Summary of Contents for 2015 Buick

Reviews:

Related manuals for 2015 Buick

Brands by name

Popular brands