manualshive.com logo in svg

Lacrosse 2015 Buick, Owner'S Manual

The Lacrosse 2015 Buick Owner's Manual is a comprehensive guide that provides essential information and instructions for owners of this remarkable vehicle. Available for free download, this manual can be found on our website, empowering users to access the necessary information conveniently and hassle-free.

Share
Download
background image

Black plate (25,1)

Buick LaCrosse Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7707475) - 2015 - CRC - 10/9/14

Driving and Operating

9-25

If you are towing a trailer and
parking on a hill, see

Driving

Characteristics and Towing Tips on
page 9-63

.

Shifting out of Park

Automatic Transmission
Shift Lock

The vehicle has an automatic
transmission shift lock control
system. The shift lock control
system is designed to:

.

Prevent ignition key removal
unless the shift lever is in
P (Park).

.

Prevent movement of the shift
lever out of P (Park), unless the
ignition is in ON/RUN and the
brake pedal is applied.

The shift lock is always functional
except in the case of an uncharged
or low voltage (less than 9

‐

volt)

battery.

If the vehicle has an uncharged
battery or a battery with low voltage,
try charging or jump starting the
battery. See

Jump Starting

(On-board with eAssist Only) on
page 10-78

or

Jump Starting (with

or without eAssist) on page 10-79

.

If the shift lever cannot be moved
out of P (Park):

1. Apply and maintain the regular

brakes.

2. Turn the ignition to the ON/RUN

position. See

Ignition Positions

(Key Access) on page 9-15

or

Ignition Positions (Keyless
Access) on page 9-16

for more

information.

3. Let up on the shift lever and

make sure the shift lever is
pushed all the way into P (Park).

4. Press the shift lever button.

5. Move the shift lever into the

desired gear.

If you still cannot move the shift
lever from P (Park), consult your
dealer or a professional towing
service.

Parking over Things
That Burn

{

Warning

Things that can burn could touch
hot exhaust parts under the
vehicle and ignite. Do not park
over papers, leaves, dry grass,
or other things that can burn.

Summary of Contents for 2015 Buick
























































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2015 Buick

cam HS Series Operating Manual preview
HS Series
Brand: cam Pages: 28
Metra Electronics 70-5511 Installation Instructions preview
70-5511
Brand: Metra Electronics Pages: 2
Masterack RM470057 Assembly Instructions preview
RM470057
Brand: Masterack Pages: 4
Over Armour Offroad KAW-SX-SDK01 Instructions For Installation And Care preview
KAW-SX-SDK01
Brand: Over Armour Offroad Pages: 5
Audi Q3 2015 - 2019 Technical Service Bulletin preview
Q3 2015 - 2019
Brand: Audi Pages: 12
muth signal mirror Instalation Instructions preview
signal mirror
Brand: muth Pages: 10
Phonocar VM350 Mounting Instructions preview
VM350
Brand: Phonocar Pages: 2
Atera 022 681 Manual preview
022 681
Brand: Atera Pages: 10
RAM 4500 CHASSIS CAB 2012 Specification preview
4500 CHASSIS CAB 2012
Brand: RAM Pages: 7
Hank HKWP1100-10Q User Quick Manual preview
HKWP1100-10Q
Brand: Hank Pages: 2
Volvo 164 1969 Service Manual preview
164 1969
Brand: Volvo Pages: 266
Fisher Body FOLDING TOP 1971 Service Manual preview
FOLDING TOP 1971
Brand: Fisher Body Pages: 37
Manik 519952T Installation Instructions preview
519952T
Brand: Manik Pages: 2
Quadratec 11113.1435 Quick Start Manual preview
11113.1435
Brand: Quadratec Pages: 14
Safe Fleet PRIME DESIGN HRR3-E-PM42 Manual preview
PRIME DESIGN HRR3-E-PM42
Brand: Safe Fleet Pages: 12
N.R. AUTOSEATS Top User Manual preview
Top
Brand: N.R. AUTOSEATS Pages: 8
Bracketron Multi Vehicle Mount MVM-35-05 Installation Manual preview
Multi Vehicle Mount MVM-35-05
Brand: Bracketron Pages: 4
Yakima SUPDawg Manual preview
SUPDawg
Brand: Yakima Pages: 10

Brands by name

Popular brands

Load more brands