Sold & supported by
CW Laser Diode Driver for
Butterfly 14Pin Package
SmartPower XS 10-2
Made in Germany by
3-11
SmartPower XS 10-2
LaCoSys Sept 2020
Rev. A
FEATURES
Laser driver for butterfly-14-Pins
LC96 package
Integrated PI- control loop for
laser built in Peltier element
Wide input voltage range
Very low power dissipation
Transient protection
Over temperature protection
for driver
Analog set point control
Enable/Disable for laser current
Slow start laser diode protection
Single power supply for complete
diode laser current source
Easy to mount and user friendly
PARAMETERS
LASER
Current Range:
0...2A
Voltage Range: 0...5V
Current Resolution: analog
Current Accuracy: ±0.5%
Current Stability: <0.1%
Current Noise: < 5mA rms
Rise Time: < 150µs
Fall Time: < 150µs
Current Limit: 1.1A
Enable Input: TTL (Low)
Analog Input: 1V/1A
TE-cooler DRIVER
Current: max. ±2A
Voltage: max. ±2.5V
Sensor Typ: NTC10k
Accuracy: ±0.5K
COMMON
Supply: 7…25Vdc 20W
Size (HxWxD): 20x56x62 mm
Mass: 0.016kg
DESCRIPTION
The Diode-Laser-Source „SmartPower XS“ laser diode driver with
Temperature-Controller is a high precision, safe and cost effective
solution for driving 14pin Butterfly package diode lasers in CW
mode. You can set Current from 0...2A, monitor temp set point and
monitor current. The OEM- Board comes with a built-in
temperature protection for the wide range input stage.
The temperature is controlled by a PI-Control-Loop. The control
loop uses the NT10k temperature sensor normally built in the laser
devices (external sensor possible).
Every device has passed our Test Lab to ensure high quality and
reliability.
Summary of Contents for SmartPower XS 10-2
Page 1: ......