3. Installing Your LaCie Drive
page 15
LaCie DL DVD±RW Drive
User’s Manual
8) Next, set the LaCie DL DVD±RW Drive’s Device Configuration Jumper:
When using one IDE interface cable, place the Device Configuration Jumper on the Slave
setting, as shown here:
When using two IDE interface cables and there is only one DVD-R/RW drive, place the Device
Configuration Jumper on the Master setting, as shown here:
The LaCie DL DVD±RW Drive is pre-configured to the Master setting.
When using two IDE interface cables and there are two DVD-R/RW or another CD-
ROM/R/RW drive, place the Device Configuration Jumper on the Slave setting.
Important Info:
For a more detailed discussion of the Device Configuration Jumper, please see
5.6. Device
Configuration Jumper Settings
.
Slave Configuration
Master Configuration
