LaCie 5big Thunderbolt™ Series User Manual
35
Turn on the product. Before the disk will mount on your desktop, it needs to be formatted into an HFS+
9.
volume using Disk Utility. Then it can be integrated into a new RAID array as described in
Create a RAID
Array
. If you are replacing a disk that was in a RAID 1 array, refer to
this article
from Apple for instructions.
Caution: To avoid potential problems caused by electrostatic discharge (ESD), it is recommended that you
do not touch the hard disk’s printed circuit board. As a further precaution against ESD, use an anti-static
wristband or an anti-static mat to ground yourself when handling the hard disk.
