LaCie 5big Thunderbolt™ Series User Manual
12
Install disk(s) in disk tray(s):
4.
Place the empty disk tray onto the flat work area with the handle on the bottom left.
1.
Many disks have a label on one side and the printed circuit board on the opposite side. With its label side
2.
facing up, gently place the hard disk within the disk tray. Keep the side with the printed circuit board on
the work space and the SATA connector facing to the right. The four tray screw slots should align with the
disk’s four screw holes.
Using the Phillips head screwdriver, carefully fasten all four screws into the four tray slots. Do not over
3.
tighten the screws. Repeat the process if you are installing multiple disks.
Insert full disk tray(s). Carefully insert the full disk tray into an empty disk slot. Gently push the disk tray
5.
handle firmly until you feel it snap into place. The disk tray handle should be flush with the back of the
enclosure. If you are adding the second disk, insert it next.
