LaCie 5big Network 2
• DESIGN BY NEIL POULTON
Connecting to a Network
User Manual
page 12
2.1. STEP 1: Connect the Power
Supply
1. Connect the power supply to a wall outlet and to the LaCie 5big
Network 2 (
Fig. 03
).
Now move on to step 2, section
2.2. STEP 2: Connect the Ethernet
Cable
.
CAUTION:
Only use the AC adapter supplied with your specific
LaCie device. Do not use a power supply from another LaCie device
or another manufacturer. Using any other power cable or power
supply may cause damage to the device and void your warranty.
Always remove the AC adapter before transporting your LaCie drive.
Failure to remove the adapter may result in damage to your drive
and will void your warranty.
TECHNICAL NOTE:
You may use your LaCie drive when in a for-
eign country thanks to its 100-240 Volt power supply. To be able to
use this feature, you may need to purchase an appropriate adapter
or cord. LaCie accepts no responsibility for any damage to the drive
resulting from the use of an inappropriate adapter. Using an adapt-
er other than one authorized by LaCie will void your warranty.
Fig. 03
