5. Configuring Your LaCie Ethernet Disk
page 14
LaCie Ethernet Disk
User’s Manual
5. Configuring Your LaCie Ethernet Disk
Before your users can access and use the LaCie Ethernet Disk, you have to make sure the correct IP address and network
settings are assigned to the unit.
5.1. Installing the LaCie Network Configurator
To assist you in assigning the correct network settings, LaCie has provided you a Network Configurator program.
5.1.1. Windows Users
Insert the installation CD-ROM into your drive to install the Network Configurator Program.
Select and install the program
a. Double click on the
Network Configurator
icon, after you have inserted the CD.
b. When prompted, select a location where you would like to install the Network Configurator program (By
default, it saves under C:\Program Files\LaCie NAS Configurator)
c. Click
Next
.
d. Click
Install
to install the program.
e. Click on
Done
to confirm.
After installation, find the
LaCie Network Configurator
in the location you have installed it and run the program to
configure the LaCie Ethernet Disk on the network.
5.1.2. Mac OS 9.x Users
Insert the installation CD-ROM into your drive. Double-click on the Mac OS install icon. The LaCie Network Configurator’s
installer will start. Click on the LaCie
Network Configurator
icon once it is installed to configure the network.
Important Info:
Your system must have Java installed. Most systems have Java enabled by default. Please refer to
your operating system’s manual for specific information if it is not installed.
1
2
