LaCie 324 Monitor
Introduction
User Manual
page
1.2. Monitor Specifications
Technology
Wide-Gamut S-PVA
Display Diagonal
24 inches (61 cm)
Active Display Area
518.4 (H) x 324 (V) mm
Resolution
Some systems may not support all modes listed.
Primary mode
: 1920 x 1200 at 60 Hz – LaCie recommends this resolution for optimal display perfor-
mance.
Secondary modes
: 720x400@70Hz, 823x624@75Hz, 1280x960@60Hz, 640x480@60 Hz/67Hz/
72Hz/75Hz, 800x600@56Hz/60Hz/72Hz/75Hz, 1600x1200@60Hz, 1024x768@60Hz/70Hz/75Hz,
1280x1024@60Hz/75Hz, 1440x900@60Hz, 720x480, 1280x720, 1920x540, 1920x1080@60Hz,
640x400@56Hz, 848x480@60Hz, 1280x720@60Hz, 1280x768@60Hz, 1360x768@60Hz
Pixel pitch
0.270 mm, 89 PPI
Gamut
92% NTSC
Color depth
16,777,216
Gamma correction
10 bit
Luminance
400 cd/m
2
(typical)
Contrast ratio
1000:1 (typical)
Response time
Rise time + Fall time : 16ms (typical) 8ms G to G
Viewing angles
Left/Right ±178°, Up/Down ±178°
Connections
Mini D-Sub, DVI-D, 2xHDMI
Power consumption
140W typical, <2W in power save mode
Weight
10.8 kg, 7.9 kg without stand, 13.4 kg with packaging and accessories
Ergonomy
Up / Down 29° to -5°, Left / Right 350°, Height : 70 mm
Operating Conditions
Temp 5° to 35°, Humidity 10% to 90%, Altitude 0 to 10,000 ft.
Storing Conditions
Temp 20° to 60°, Humidity 10% to 90%, Altitude 0 to 40,000 ft.
Certifications
CE, FCC-B, EnergyStar, GOST-R, CSA, ISO 13406-2, PSB, WEEE, ROHS
*Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This
is normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies,
each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.