LaCie 324 LCD Monitor
Getting Connected
User Manual
page
2.5. Installing an Alternative Stand or Attachment
The base of the LaCie 324 can be disconnected to attach a
flexible monitor arm or other attachment compliant with VESA
100 standards. Prepare the arm and screws required for instal-
lation beforehand.
Remove monitor stand for mounting
To prepare the monitor for alternate mounting purposes:
Power off the monitor and your computer.
Disconnect all cables including the power cable.
Place hands on each side of the monitor and lift up to the
highest position.
Place monitor face down on a non-abrasive surface. To pre-
vent any scratching or damage, spread a soft cloth under-
neath the LCD panel during this operation.
Remove the 2 mounting screws accessible through the holes
in the stand (Fig. 2.5-A).
Slide out and remove both parts of the VESA cover from the
stand (Fig. 2.5-A).
Place one hand around the base and remove the remaining
2 mounting screws (Fig. 2.5-B).
The monitor can now be mounted using an alternative attach-
ment. If the stand needs to be re-attached, simply reverse this
process.
Attaching the alternative stand or attach-
ment
Attach the stand or arm attachment using the 4 screws from the
stand removal.
ImpOrTANT INfO:
For safety reasons, please make sure that the monitor arm
can stably support the weight of this monitor (approx. 8.3
kg/18.3 lb.).
To avoid damage to the monitor and stand when mounting,
please use only M4x10 screws such as those included with
the monitor.
Refer to the alternative stand’s documentation for instructions
specific to that attachment.
1.
2.
3.
4.
5.
6.
7.
✦
✦
✦
Figure 2.5-A
Figure 2.5-B