![background image](http://html1.mh-extra.com/html/lacie/108136-photon-20vision-ii/108136-photon-20vision-ii_user-manual_3242414033.webp)
6. Troubleshooting
page 33
LaCie photon20visionII
User’s Manual
The Problem
The “CONTROLS LOCKED”
message appears on the
screen.
The display image is incorrect.
Questions to Ask
Does the “CONTROLS LOCKED”
message appear when you push the
MENU button?
Is the display position incorret?
On the screen’s background, are
there vertical bars or stripes visible?
Is there horizontal noise appearing
in an image, or are characters not
being clearly portrayed?
Is the screen color mono or
abnormal?
Possible Solutions
This function allows you to prevent the current control
settings from inadvertently being changed. To unlock
the OSD controls, push and hold the MENU button
and button for 3 seconds – the “CONTROLS
UNLOCKED” message will then appear.
Press the AUTO button to automatically adjust your
display image to its ideal setting. If you do not get the
results you desire, adjust the image position manually
using the H position and V position icon in the OSD.
Check Control Panel > Display > Settings to see if the
frequency or the resolution was changed. If it was,
readjust the video card to the recommended
resolution.
Press the AUTO button to automatically adjust your
display image to its ideal setting. If you do not get the
results you desire, adjust the vertical bars or stripes
manually using the CLOCK icon in the OSD.
Press the AUTO button to automatically adjust your
display image to its ideal setting. If you do not get the
results you desire, manually adjust the horizontal bars
using the PHASE icon in the OSD. Check Control
Panel > Display > Settings and adjust your monitor to
the recommended resolution, and adjust your display
image to the ideal setting. Set the color setting higher
than 24 bits (true color).
Check to see that the signal cable is properly
connected, and use a screwdriver to fasten the
screws. Make sure that your video card is properly
inserted in its slot. Check Control Panel > Display >
Settings and set the color setting higher than 24 bits
(true color).