INSTALLER’S MANUAL
A
ll work on or repair of an appliance must be carried out by a qualified installer.
Gas repairs
Greasing gas valve
:
T
he valve may lose its grease through use. It is therefore necessary to grease the valve in order to
make it leaktight and facilitate turning.
1 - Shut off the valve and / or the main electrical supply of the unit.
2 - Take out the knob corresponding to the gas valve to be greased.
3 -
U
nscrew the head from the body of the burner valve.
4 -
G
rease the tap shaft (High temperature lubricant, for example : SILICAL GEL ™ BARBAHL).
Caution !
Any excess grease should be removed.
Reverse operation 3 to 1 (in that order) to put valve and knob back on.
Limiting thermostat :
I
n accordance with the construction regulations, the limiter thermostat is intended to protect the
range from overheating.
I
n the event of overheating the limiter thermostat is triggered and cuts out the range’s oven
functions.
T
he advanced technology used in the limiter means that it is very sensitive to impacts and vibration
that may occur during transport and handling.
T
he limiter may therefore be unexpectedly triggered when the oven is first heated and stop the
oven from working.
To reset limiting thermostat :
1-
R
emove the ventilation strip from the rear of the hob
.
2-
U
nscrew the cover protecting the knob
.
3-
P
ress the knob marked
V
(fig.
【
5
】
)
1-
R
emove the ventilation strip from the rear of the hob
.
2-
U
nscrew the cover protecting the knob
.
3-
P
ress the knob marked
V
(fig.
【
5
】
)
For electric hobs :
The pushbutton is located under the hob. To access it, it is necessary to open the hob (see
paragraph “Opening and refitting the hob”) and press the pushbutton
W
(fig.
【
6
】
).
REPARATIES
V
【
5
】
W
【
6
】
Ft 134a - FR - Rév 00 - Date modif : 11/06/07
18/37
