Lacanche Bienvenue, Technical Manual

Page: 16 / 36

BIENVENUE INSTALLATION
16
INSTALLATION OF YOUR RANGE
Installation videos are available at:
www.frenchranges.com/support.
NOTE
: Range installation should be performed by a licensed and bonded
electrician or gas plumber.
STEP 1
Plug the range into the power outlet. DO NOT
remove this power cord. Removal of power cord
may result in additional service expenses.
STEP 2
Connect the gas line. Use a new flexible fuel
line rated for use with NatGas or LP fuel of the
correct inner diameter. Input fuel pressure must
be no more than 0.5psi. The specific BTU output
for your range listed on the UL nameplate on rear
of range or on bottom of drawer box. Please see
the white UL stickers on the back of the range for
BTU output or underneath the storage drawers.
STEP 3
Raise the range to the height of the counter-
top. Then install proper range spacer behind
range cooktop. Please see frenchranges.com/
range-spacer.
STEP 4
Roll range backwards into place.
STEP 5
Raise the range to the height of countertop
and level the range when it is in its final resting
position. Range cooktop must be flush or above
adjacent countertop height.