LabSmith LC880, User Manual, Page: 36 / 37

36
Store/Recall Settings Profiles
As you know, you can store 64 different “Settings Profiles” in the LC880. A Settings profile includes properties,
variables, and logic for each of the eight channels. Storing Settings profiles lets you switch between settings while
running an experiment, to test different timing criteria, initial conditions, etc., without re-plugging or reprogramming.
Settings profiles are enumerated AA, AB… , BA, BB… HH, and they are accessible by pressing those buttons.
To store the current settings in a Settings profiles:
1. Click the Store button
2. Click the two-letter combination for the Settings profile.
Similarly, to recall a stored Settings profile:
1. Click the Recall button
2. Click the two-letter combination for the Settings profile.
You can recover these settings even after the unit has been turned off or disconnected. The most recently used setting
is automatically loaded when the LC880 is powered up. If you attempt to recall an invalid setting, the power LED
flashes red and the system retains its previous setting.
To recall a setting profile from within Trigger:
1. Click the “Recall Setting… ” from the Program menu.
2. Click on or type in the desired setting (case insensitive).
3. Click “Recall.”
To store a setting profile from within Trigger:
1. Click the “Store Setting… ” from the Program menu.
2. Click on or type in the desired setting (case insensitive).
3. Click “Store.”