34
Selecting a Channel from the Front Panel
Each front panel function requires that you select a channel (or ALL channels) and a function.
To select a channel
, click the channel button. The channel LED will glow brightly, as will the available Function
buttons. The ALL channels button will function similarly to select all channels. You can now perform one of the
front panel functions on that channel.
In the image below, the F channel button has just been pressed. The buttons for the four available functions (Enable,
Disable, Trigger and Reset) glow yellow.
Performing a Front Panel Function
Front panel functions can be accessed in one of two ways:
-
select a channel (or ALL channels), then choose a function
-
select a function, then choose a channel (or ALL channels).
There is no significant difference between these two approaches.
In the image below, the Enable button has just been pushed. The channel buttons and the ALL channel button are lit.
Pressing one of these buttons will now enable the channel(s).
Summary of Contents for LC880
Page 2: ...2...
