15
“Apply” versus “Program All Channels”
Each properties screen includes an “Apply” button which, when clicked, will send the current timing properties to
the channel on the LC880.
NOTE:
If you change a channel’s properties, closing the Settings screen will have
the same effect as clicking “Apply.”
Clicking the “OK” button will also have
the same effect.
Logic settings are sent and saved in the LC880, but any changes are not implemented on the LC880 until you click
“Set All Channels” button
on the Main screen or choose Program>Program All Channels.
“Program All Channels” is the same as clicking “Apply” for all channels and then instructing the LC880 to update its
logic programming.
The “Cancel” button cancels any edits made since the last time the “Apply” button was clicked and closes the dialog
window.
Fixed Output Mode
In this mode, the channel output remains in the selected state (Low or High), regardless of the input.
The front panel LED
for the channel will glow green when the output is Low or red when the output is high.
To try fixed output mode
:
Summary of Contents for LC880
Page 2: ...2...