Labrie Top Select, Maintenance Manual

Page: 26 / 145

18
Safety
7. Lower the tailgate onto the safety prop using the T
AILGATE
control lever on the cab console.
8.
Turn OFF the pump switch.
9. Stop the engine.
10.
Lock out and tag out the vehicle (see Lockout/Tagout Procedure on page 22).
Putting the Tailgate Safety Prop Back in Place
To put the tailgate safety prop back in its home position:
1. Start the engine.
2.
Turn ON the pump switch.
3. Raise the tailgate by about 3 feet.
4.
Remove the prop safety pin (see Figure 2 - 5).
5. Raise the tailgate safety prop up to its storage position (see Figure 2 - 6).
Figure 2 - 6 Tailgate safety prop in storage position
6.
Reinstall the safety pin into the base upper hole to secure the tailgate safety prop (see Figure 2 - 6).
7. With the T
AILGATE
control lever on the cab console, lower and close the tailgate completely.
The
TAILGATE
U
NLOCKED
/B
ODY
R
AISED
light indicator should turn off (see Figure 2 - 7).
8. Turn OFF the pump switch.
9.
Stop the engine.
10. Put back the tailgate-locking safety pin (see Figure 2 - 4).
Stand clear of tailgate path while putting the safety prop back in its home position.
Safety pin
DANGER!