Labrie automizer, Operator'S Manual

Page: 50 / 74

Operating the A
UTOMIZER
TM
R
ECYCLER
45
Body inspection procedure:
1.
Activate the packer for a full cycle.
2.
Check the hopper bucket operation.
3.
Check if the tailgate safety pins are in place. Put them in place to lock the tailgate properly.
4.
As you walk along the side of the truck, clean all safety labels.
5.
Check the frame area, fuel tank and air tanks (air tanks must be drained every day), cleaning traps
and wheels for leaks, cracks or other type of problems.
6.
At the front end, check lights, mirrors and pump.
7.
Go around and check lights, clean camera, labels , lights, etc.
8.
Check for hydraulic leaks.
Hopper Bucket Inspection Procedure
On a daily basis, perform a visual inspection of the hopper bucket, looking for leaks, cracks or
premature wear of the moving parts. Refer to the Lubrication section in the Maintenance Manual for
detailed greasing points.
Figure 4-1 Hopper bucket
Danger! Do not stand directly in the path of the hopper bucket while performaing the inspection.
Warning! Apply the lockout/tagout procedure at all times. See Locking Out and Taging Out the
Vehicle on page 27
Hopper bucket