Labrie Automizer Versa Hand, Operator'S Manual, Page: 63 / 80

Operating the A
UTOMIZER
V
ERSA
H
AND
TM
57
Body Inspection Procedure
Exit the cab to continue your inspection. Bring a rag along to clean all accessible lights, labels, camera
lenses, etc. Check for mechanical problems: rollers, hinges, door-locking mechanisms, wear items,
etc. Report any defective system to the maintenance personnel.
Body inspection procedure:
1.
Activate the packer for a full cycle.
2.
Check the automated arm operation.
3.
Check if the tailgate safety pins are in place. Put them in place to lock the tailgate properly.
4.
As you walk along the side of the truck, clean all safety labels.
5.
Check the frame area, fuel tank and air tanks (air tanks must be drained every day), cleaning traps
and wheels for leaks, cracks or other type of problems.
6.
At the front end, check lights, mirrors and pump.
7.
Go around and check lights, clean camera lenses, labels , lights, etc.
8.
Check for hydraulic leaks.
Arm Inspection Procedure
On a daily basis, perform a visual inspection of the arm, looking for leaks, cracks or premature wear of
the moving parts. Refer to the Lubrication section of the
Maintenance Manual for detailed greasing
points.
Figure 4-1 Automated arm
Danger!
Do not stand directly in the path of the arm while performing the inspection.