Labrie Automizer Versa Hand, Operator'S Manual, Page: 28 / 80

22 Safety
The main components of this system are a control box, located in the cab, sensors, located on the rear
bumper, and the solenoid valve located on the chassis.
When the system is turned on, a green light on the cab control box should light up to indicate that the
system is operating. When an object is detected, a yellow light comes on and an audible alarm is
heard. The vehicle brakes are automatically applied. The brakes can be disabled by pressing the A
UTO
B
RAKE
O
FF
switch on the control box. This will cause a red warning light to turn on indicating the
brakes will not automatically engage. The yellow light and audible alarm will still operate in this mode
as a safety precaution.
The sensors are installed on the rear bumper and adjusted in order to obtain low coverage to ground.
For details on how to adjust the sensors, refer to the Installation Manual of the sensor manufacturer .
Warning!
Sensor lenses must be kept clean to ensure proper operation of the system. If the lenses
are allowed to become dirty, system range will be decreased.