242 Lifting Arm
Keyless Locking Devices
The Heavy-Duty R
IGHT
-H
AND
™ arm utilizes keyless locking devices to retain certain pins. Proper
inspection and maintenance procedures are essential for trouble-free operation of this arm. The
procedures outlined below will cover the proper inspection, disassembly and assembly procedures.
During the daily arm inspection, pay particular attention to the pins. The pins should not move and
should be centered equally between both keyless locking devices. If any movement has been
detected, the keyless locking device should be disassembled and inspected for wear or damage.
The illustration below shows the location of the keyless locking device on the R
IGHT
-H
AND
™ arm.
Figure 10
-
22 Keyless locking device on R
IGHT
-H
AND
™ arm
The table below gives a brief description of the keyless locking device used on a Heavy-Duty R
IGHT
-
H
AND
™ arm.
Here are some important notes to remember when maintaining keyless locking devices:
Do not use any oil with Molybdenum Bisulphide, high pressure additives, or grease.
These substances notably reduce the coefficient of friction.
Do not use an impact wrench or power tools to loosen or tighten any of the tightening screws.
Use a torque wrench to verify tightening torque value on each screw.
I
MPORTANT
:
Be sure to follow all appropriate lockout/tagout procedures (see Locking Out and Tagging Out the
Vehicle on page 26) as well as your standard shop/facility procedures before attempting this
procedure.
Labrie P/N Bolt Torque (Qty x Size) Bore Diameter
Pin
Diameter
QUB00493
13 ft-lbs (12 x M6)
2.362" - 2.364"
1.250"
Summary of Contents for AUTOMIZER FULL EJECT
