LABORIE Solar Blue, Service & Installation Manual

Page: 37 / 198

36 © 2008
– 2020 by MMS B.V.
Chapter 3
Figure 3.7 Solar Blue Hardware test program (USB)
The Solar Blue module and the connected devices (to the digital MMS-bus
ports), the USB connection to the computer and the power status are
graphically displayed.
Click the module button you want to test (i.e. the Solar Blue module).
Further instructions can be found in the following paragraphs:

To test the Solar Blue module: see § 4.4.

To test the remote control: see § 5.3.

To test the flowsensor: see § 6.4.
3.5.4 Get USB information
USB information can be found in the Hardware test Solar (USB). Choose
Diagnose > Get USB information to obtain information about the USB
devices connected to the USB ports on the computer.
Figure 3.8 USB information