LABORIE NXT Series Owner'S Manual Download Page 13

Page: 13 / 116

Introduction

NXT Owner’s Manual NXT-UM01, MAN2010

1.3 Equipment Intended Use

Refer to the descriptions below for a breakdown of intended use per module.

Standard Equipment

•

NXT Docking Station with Pump: Wired device which uses a peristaltic infusion

pump to fill a patient’s bladder with saline and/or contrast from an IV bag.

•

Urocap NXT: Wired or wireless and battery powered device which measures

volume and flow rate of urine.

•

Roam NXT: Wired or wireless and battery powered detachable module that

connects to the PIM NXT.

•

PIM NXT: Device which is powered by the Roam NXT to measure pressure and

electromyography.

•

PC: Computer which controls the system activity and displays and stores data.

•

Synergy: Application software which runs on the PC to control the system activity

and display, and store data.

•

Bluetooth Dongle NXT: Allows wireless communication between modules and the

system.

•

Remote Control NXT: Wireless and battery powered device which allows control

of the system from a distance.

Optional Equipment

•

Video Card/Adaptor: Allows information from an external image source to be

recorded by the system

•

Printer: Allows hardcopy reports to be created.

Accessories

The accessories of the equipment are as follows:

•

Catheters, Electrodes, Tubing, Pressure Transducers: Disposable or reusable

items used to record data from the patient.

•

Commode, Procedure Chair: Supports patient to allow a procedure to be

performed more easily.

•

Flow Stand, IV Pole, Carts, Stands, Trolleys: allow procedures to be performed

more easily.

•

SmartSense Barcode reader: Allows accessory device identifiers to be recorded

by the system.

1.4 Contraindications

The NXT Urodynamic System is contraindicated for use in patients with a pacemaker or ICD

(Implanted cardioverter-defibrillator).

Summary of Contents for NXT Series





















































































































Search results

Summary of Contents for NXT Series

Reviews:

Related manuals for NXT Series

Brands by name

Popular brands

LABORIE NXT Series, Owner'S Manual

Search results

Summary of Contents for NXT Series

Reviews:

Related manuals for NXT Series

Brands by name

Popular brands