Labomed Prima C User Manual Download Page 37

Page: 37 / 38

Prima C/ Prima CS COLPOSCOPE

20.

TECHNICAL SPECIFICATION

PRIMA C

•

Star Base Stand & Column, lockable wheels.

•

Straight Observation tube, interpupillary distance

50-75mm. Optional:

45° inclined.

•

WF 10/18mm FOV, focusable eyepieces with retractable eye guards, diopter adju/- 5mm

Optional:

WF 12.5x / 18mm

•

5-step magnification: 0.4x, 0.6x, 1.0x, 1.6x, 2.5x.

•

F-300mm objective.

Optional

: f-400mm.

•

Built-in-green filter

•

Inbuilt 27W LED (5700K)

•

60W max power consumption.

•

100V-240V; 50/60 hz, voltage input. Fuse F2.5 Amp.

NOTE: For Safety & Warranty Claims Eligibility

Use constant voltage stabilizer to avoid sudden input voltage variation and to enhance LED life.

PRIMA CS

•

H Base Stand & Column, lockable wheels.

•

Straight Observation tube, interpupillary distance 50-75mm.

Optional

: 45

inclined.

•

WF 10/18mm FOV, focusable eyepieces with retractable eye guards, diopter adju/- 5mm

Optional: WF 12.5 / 18mm.

•

5-step magnification: 0.4x, 0.6x, 1.0x, 1.6x, 2.5x.

•

F-300mm objective. Optional: f-400mm.

•

Built-in-green filter

•

Inbuilt 27W LED (5700K)

•

60W max power consumption.

•

100V-240V; 50/60 hz, voltage input. Fuse F2.5 Amp.

NOTE: For Safety & Warranty Claims Eligibility

Use constant voltage stabilizer to avoid sudden input voltage variation and to enhance LED life.

6128000-795

Prima C/ Prima CS

Issue 2.2
Printed on November,2020

Summary of Contents for Prima C







































Search results

Summary of Contents for Prima C

Reviews:

Related manuals for Prima C

Brands by name

Popular brands

Labomed Prima C, User Manual

Search results

Summary of Contents for Prima C

Reviews:

Related manuals for Prima C

Brands by name

Popular brands