16
TURNING THE LAMP ON
PLACING SPECIMEN ON THE STAGE
Fig. 20
Fig. 21
Fig. 22
1
2
1
3
2
5
4
DETAILED OBSERVATION PROCEDURE
11
Lx 400
1
2
1. Flip the main switch to “I” (ON) as shown in figure 20.
2. Rotating the light intensity adjustment knob (Fig. 21) in the
direction of the arrow increases brightness and rotating
knob in the opposite direction decreases brightness. The int-
ensity bar next the knob indicates the direction of intensity
level.
1. Rotate the coarse adjustment knob (2) in anticlockwise
direction to fully lower the stage.
2. Open the bow-shaped lever (3) outward by pulling on lever
handle (1), place the specimen by sliding the specimen glass
plate (s) on the stage from the front toward the slide seat at
the rear.
3. After positioning your specimen slides, (2max) return the
bow-shaped lever (3) gently by slowly releasing control
knob (1).
4. Rotating the upper co-axial knob controlling the y-axis
movement (4) moves the specimen in the vertical direction.
Rotating the lower knob (%) moves the specimen in the X-
axis or horizontal direction.
Do not adjust the specimen holder directly by hand, for this
will damage the rotary mechanisms.
CAUTION: When the specimen holder reaches stop position,
the rotation force of the X/Y knobs become stiff. Stop rotat-
ing at this point.
9126000-795
Lx 400
Issue 1.5
Printed on April,2019
