Labomed eVO 500, User Manual

Page: 16 / 22

15
4. Remove the bulb from the housing.
Replace the blown lamp with new one.
Insert the bulb in the housing and
secure the same in the housing.
5. Insert the holder in the bulb slowly and
tighten the lamp cover after putting it
in its place.
Replacement of Fuse
6. Open the fuse holder provided on the
back side of the power supply. See fig.
12
7. One spare fuse is being provided in
the box. Replace the dead fuse with
the live one. Insert the fuse holder
back to it’s position.
Fig. 11
Fig. 12
Fig. 13