18
8126700-795
SL 20i
Issue 1.0
Printed on June,2019
SL 20i
SPECIFICATIONS (continued)
Movement Ranges
Longitudinal (In/Out) 80mm
Lateral (Left/Right) 109mm
Vertical (Up/Down) 30mm
Chin rest Range 80mm
Fine movement 13mm
(Cross Slide)
DISPOSAL
This product does not generate any environmentally hazardous residues. At the end of its product life,
follow your local laws and ordinances regarding the proper disposal of this equipment
.
SOFTWARE REVISION
There is no software installed in this unit.
SYSTEM CLASSIFICATION
•
Classification of applied part by grade of protection against electric shocks:
B type applied part
B type applied part provides a certain grade of protection against electric shocks, particularly
with regard to leak current, measuring current for patient, and reliability of connection to
protective facility (Class I equipment).
•
Type of protection against electric shocks: Class I equipment
Class I equipment does not depend on basic insulation only for electric shocks; it also provides
means for connecting the equipment to a protective grounding system so that the accessi
-ble metal parts do not become conductive in case of failure in the basic insulation.
•
Grade of protection against a hazardous ingress of water: IPxO
This product does not provide protection against ingress of water.
(Grade of protection against a hazardous ingress of water stated by IEC 60529: IPxO)
•
Classification by the method of sterilization/disinfection: None
This product has no part requiring sterilization/disinfection.
•
Classification of safety of use in an environment containing air/combustible gas, oxygen or
nitrogen monoxide/combustible anesthetic gas:
Equipment not suited for use in an environment
containing air/combustible gas, oxygen or nitrogen monoxide/combustible anesthetic gas
Use this product in an environment not containing combustible anesthetic gas and combusti
-ble gas.
•
Classification by mode of operation: Continuous operation equipment
Continuous operation refers to an operation under normal load conditions without exceeding
specified temperatures, without a limit of time.
RESTOCKING CHINREST TISSUE
When the chinrest tissue supply is depleted, pull out the chinrest tissue pins and replace the tissue.
