Instruction manual for CoolSafe
01012016QA01
Item No. 700637
CopyRight © 2016
Page
8
of
30
4.2.3
Power supply for heating of and temperature signals from shelves
The rack and shelves placed inside the condenser is connected to the control system through two
cables placed on the back of the cabinet.
For temperature regulation purposes, the temperature in each shelf is measured using a PT 100
temperature sensor. The signals from these sensors regulate the heating wire build into each shelf.
4.2.4
Product temperature
The temperature in the product being dried is measured using a thermocouple.
4.2.5
Drain valve
The drain valve is placed on the front of the cabinet. After de-icing or cleaning of the ice condenser
it can be drained through the drain valve.
Power for heating in shelves
Temperature signal from shelves
Product temperature signal
