Labnet MultiGene Mini, Operation Manual, Page: 12 / 22

10
File Saving Screen
In this screen use the keypad to enter
the file name. Press
“ Enter ” to move
the cursor down one position. Select
User and File Name through the pop-
up character selection box. Click left
button to delete characters while
clicking right button to move the
cursor. Press the “
Caps ” key to shift
from a capital to lowercase letter, and
on the top left a capital or small letter
indication will appear. (example: abc)

Press “ Main ” to go back to the
main interface.

Press “ Save ” to save the file. When the file is normally saved, “File has been
saved. Please continue another operation” will appear. Press “ Enter ” to close
the reminder window. If the file name was already in use, the system will
display
（
Rename
）
or continue to save (Save).

If the current Control Mode is Block mode, press “ Run ” to enter the file running
interface; if the current Control Mode is Tube mode, pressing “ Run ” will open, a
dialog box to input the sample volume.
Relation of cycle and segments in a file
File
section 1
Cycle1 × ** From ** to **
Seg. 1
Seg. 2
Seg. 16
section 2
Cycle2 × ** From ** to **
·
·
·
·
·
·
section 5
Cycle5 × ** From ** to **
File Save Interface
Hotlid=off 2009-07-28 10:05:00
abc
User ： LabnetI I
File Name ： 1 1
Password ： ***** *
Password confirm ： ***** *
Main Caps Save Run n
Please enter sample volume:
050µl