SET-2000 (110 VAC)
D15349AE-1
Installation and Operating Instructions
Copyright © 2019 Labkotec Oy
4/15
We reserve the right for changes without notice
2
INSTALLATION
The SET-2000 can be wall-mounted. The mounting holes are located
in the base plate of the enclosure, beneath the mounting holes of the
front cover.
The connectors of the external conductors are isolated by separating
plates. The plates must not be removed. The plate covering the
connectors must be installed back after executing cable connections.
The cover of the enclosure must be tightened so, that the edges touch
the base frame. Only then do the push buttons function properly and
the enclosure is tight.
Before installation, please read the safety instructions in chapter 6 !
Figure 3. SET-2000 installation and connections of SET/OS2
and SET/TSH2 sensors.
