LABESTO
LVS3220
33
TROUBLESHOOTING
Nothing happens when you try to vacuum package:
1. Check if the power cord is tightly plugged into electrical outlet.
2. Check if the power cord is damaged.
3. Check if electrical outlet is working by plugging in another appliance.
4. Make sure the latches is in the locked position.
5. Make sure bag is placed correctly inside Vacuum Chamber.
6. Allow the appliance to cool for 40 seconds before using it again
NOTE: To prezent overheating of the appliance, allow the appliance to cool
down for 40 seconds before using it again, and keep the cover open.
Air is still In the bag after
1. Make sure the opening of the bag is placed entirely insi de Vacuum Chamber.
2. AIR IS STILL IN THE BAG AFTER VACUUM:
Examine the bag if it leaks. Seal bag with air, then immerse
it in water and apply pressure ,Bubbles indicate a leak, use
a new bag if bubbles appear.
3. If you use a Bag with customized size, check the seal of bag. A wrinkle in the bag
along the seal may cause leakage and allow air to re-enter,just cut bag and
reseal.
4. Do not attempt to make your own side seams for Bag, the bags are manufactured
with special side seams , which are sealed all the way to the outer edge. Making
your own side seams may cause leakage and allow air to re-enter.
Summary of Contents for LVS3220
Page 41: ...www labesto eu...