12
Loading print ribbon
Using LabelTac
®
Loading print ribbon
1
Lift printer cover open. Push print head release lever to open
print head mechanism.
(a)
2
Insert the ribbon onto the ribbon supply spindle (rear),
and the blank cardboard core onto the ribbon rewind
spindle (front).
(b)
3
Route the ribbon through the ribbon sensor slot and up and
over the print head.
(c)
Stick the ribbon onto the ribbon
rewind cardboard core with tape or a piece of LabelTac®
supply, being sure to keep the ribbon as flat and wrinkle-free
as possible.
4
Wind the ribbon rewind spindle by hand until the ribbon is
smooth, properly stretched and wrinkle-free.
5
Close print head mechanism by pressing down on both
sides, making sure the latches are engaged properly.
(d)
Close the printer cover.
Summary of Contents for 6
