14
The following two figures are the printouts of DIRECTION 0 and 1.
Note: The printer driver may overwrite the setting set from the front panel.
Print Mode: (None/Batch Mode/Peeler Mode/Cutter Mode/Cutter Batch)
This option is used to set the print mode. Printer default setting is Batch Mode. When entering this
list, the print mode to the right side of the "
>
" icon is the printer current setting.
Press and to select a different print mode and press button to enable the
setting. Press key to cancel the setting and return to the previous menu.
Printer Mode
Description
None
Next label top of form is aligned to the print head burn line location. (Tear Off
Mode)
Batch Mode
Once image is printed completely, label gap/black mark will
be fed to the tear plate location for tear away.
Peeler Mode
Enables the label peel off mode.
Cutter Mode
Enables the label cutter.
Cutter Batch
Cuts the label once only, at the end of the printing job.
Note: The printer driver may overwrite the setting set from the front panel.
Offset:
This option is used to fine tune the media stop location. Press the button to move the
cursor from left digit to right digit, and press the button to set the value from “+” to “-” or “0” to
“9”. Press the button to set the value into printer. Press key to cancel the setting
and return to the previous menu. The default value is +000.