LM3612 PRINT & APPLY SYSTEM
USERS MANUAL
Page 32
Made in the U.S.A.
© 2021 LabelMill
06/01/2021 Model LM3612
•
CYCLE TYPE
Cycle Type determines the application type and sequence in relation to the label feed. Use the "Up" or "Down button to
select the appropriate cycle type. "Tamp Before Feed" is the default setting.
PROGRAMMABLE BLOCKS:
Print Repeat - Activates the "Print Repeat" signal to the print engine (Engine must also be enabled)
Printer Ready - Activates the "Printer Ready" signal.
Printer Fault Timer - Programmable fault timer for "Printer Ready" signal. (0.000 to 9.000)
•
Available Cycle Types
o
Feed Only
o
Tamp Before Label Feed
o
Tamp After Label Feed
o
Blow On Before Label Feed
o
Blow On After Label Feed
o
1st Trigger Feed, Product Switch Tamp
o
1st Trigger Feed, Product Switch Blow
o
Clam Shell Module Before Feed
o
Clam Shell Module After Feed
•
ENCODER
Provides a more consistent way to apply labels to a product. With this option a distance from the trigger point can be set
at which the label is to be applied. Note: optional encoder must be used with this feature.
PROGRAMMABLE BLOCKS:
Encoder – Used to toggle the encoder option on or off.
Trigger Mode - Selectable "Product Delay" or "Distance" mode.
Trigger Distance – Used to apply the label a certain distance away from the trigger point.
Enc lines/inch – Tells how many pulses the encoder will count with 1 inch of travel. (25 to 500 counts per inch)
View Conveyor IPM - Allows operator to view current speed of the encoder/conveyor.
•
JOB STORAGE
Used to store frequently used settings pertaining to different labeling jobs. Up to (6) jobs can be stored.
PROGRAMMABLE BLOCKS:
Restore A Job – Recalls settings of a saved job.
Save A Job – Stores settings for the active job.
Delete A Job – Deletes a saved job.
•
SET DEFAULTS
This setting will return the controller to the default settings.
•
PASSWORD
The PASSWORD is used to lock the menus of the control. This option is used to prevent unauthorized access to variable
data. When shipped from the factory, the pass word is to 7074 and NO MENUS are locked. The password cannot be
changed.
3-04
