![background image](http://html1.mh-extra.com/html/labelmate/twin-cat-2/twin-cat-2_user-manual_3188890006.webp)
Labelmate - The World’s Leading Manufacturer of Label Dispensers, Rewinders, Unwinders, Slitters & Counting Solutions
EXTERNAL HALT CONTROL
• An External Halt Control jack on the TWIN-CAT-2 is for use with external devices capable of providing an open circuit
halt command. A 3.5mm control cable is necessary for use (not included).
• With Pin 2 and Pin 3 of the External Halt Control circuit closed (connected together using a 3.5mm dual circuit plug), the
TWIN-CAT-2 will operate. When the External Circuit is opened, the unit will stop.
• 3.5mm “EXTERNAL HALT CONTROL” Stereo Plug (Dual Circuit Plug)
• Contact CLOSED=RUN
• Contact OPEN=HALT
• Pin 1 - No connection (NOT USED)
• Pin 2 - Normally Closed (NC) contact
• Pin 3 - Normally Closed (NC) contact return
WIND-IN/WIND-OUT
You can use the Dual Spindles to reverse the direction the labels are facing. You can also rewind the labels so that they are
in the original (serialised) ordr they came out of the printer. An optional Adjustable Paper Guide (APG-CAT) can be fitted
to help guide the outer edge of the lower label roll as it rewinds.