background image

7

Operation of the other buttons located on the ET-DSEL program selector panel

REDUCED OPENING DURING WINTER

To reduce the passage opening.

To activate the reduced opening during winter, press once button  ;

The symbol    on the display indicates that the function is on.
To disable reduced opening during winter, press once more button  .

F2

CHEMIST'S OPENING (only for models ETERNA 150 and ETERNA 200)

To open the door by a few centimetres.

(Only if the chemist's function was enabled on the automation during installation).

To enable chemist's opening press the F2 button once; the F2 symbol appears on the display.

To  disable  chemist's  opening,  press  the  F2  button  once  more;  the  F2  symbol  goes  off  on  the 

display.

F1

Door opening command

Pressing the button F1 will open the door.

The button F1 may open the door even when the "NIGHT LOCK" work program is selected, if the 

automation electronic control unit is set accordingly.

F3

It is only used if the ET-DSEL digital programmer manages two automatic doors

The ET‑DSEL digital programmer can independently manage the operation of two ETERNA sliding 

automatic doors. 

Pressing button F3, you select the door on which the work program is set;

The number 1 appears on the display when door 1 is selected; the number 2 appears if door 2 is 

selected.

Summary of Contents for ETERNA 70



















Reviews: