Labconco SteamScrubber 4010010 Series, User Manual, Page: 22 / 108

22
4: Installation
With the installation site properly prepared, you are ready to unpack and install the
equipment. This section covers how to:

Unpack and move the equipment

Connect hot water supply

Connect the pure water supply

Connect the drain

Connect electrical service

Install the equipment
Unpacking
The following tools are required to unpack and install the equipment:

Box knife

9/16" wrench

Flat-blade screwdriver

Phillips screwdriver

5/16” nut driver

Carpenter level
The following safety precautions must be followed by all personnel unpacking the
equipment.

Wear safety glasses

Wear gloves

No loose fitting clothes

Wear close-toed shoes

The cartoning allows for lifting with a mechanical lift truck or hand truck. If you
must lift the washer manually, use at least two (2) persons and follow safe lifting
guidelines.