Labconco Intelli-Sense CS 10, User Manual

Page: 35 / 72

Product Service 1-800-522-7658
31
C
HAPTER
5
U
SING
Y
OUR
B
LOWER
Normal Operation
Once your blower has been fully ducted and electrically wired, it is ready for
operation. The blower is activated from a manually operated 3-position switch on
the fume hood unless configured for Integrated Intelli-Sense Hoods supplied with
limit switches for automatic Intelli-Sense Blower operation outlined in Chapter 8.
For night set back to save energy, fully lower the fume hood sash and select the
lowest switch setting. Always monitor your airflow constantly with a fume hood
airflow monitor. For best results, use Labconco’s Guardian Digital Airflow
Monitor and order from Chapter 7.
Laboratory work can resume when the blower is operational or placed in one of the
two higher speeds, so that any prevailing fumes and/or odors can be exhausted
from the fume hood effectively. Work must cease prior to turning the blower off
or when placed at the minimum setting for night set back.