Labconco 44000 Series, User Manual

Page: 77 / 107

Chapter 7: Troubleshooting
73 P#o%&ct Se#+ice -./00.122.341/
PROBLEM
CAUSE CORRECTIVE ACTION
Not draining
properly Clogged filter Clean sump filter.
Drain line clogged or
kinked Disconnect drain line and clean or
remove kink.
Purified water does
not fill Crimp in supply hose Refer to installation instructions for
proper purified water piping
installation.
Blown fuse Replace fuse.
Motor wires
disconnected Reconnect wires.
Drain hose not
elevated above water
level. Elevate drain hose per installation
instructions.
Racks binding or out
of place Roller missing Replace roller.
Roller binding Adjust or replace rollers and rails.
Upper rack rail bent Replace rail.
Tank and inner door
have surface rust Collects normally Clean with stainless steel cleaner and
soft cloth.
5lassware is
contaminated with
mineral acids. Pre-rinse glassware.
Washer does not run No power to washer Check fuse or circuit breaker.
Door latch is open Latch washer door by pushing door in.
Washer door opens
and closes badly Cabinet opening is not
square Correct opening with leveling feet.
Door hitting counter-
top mounting screws Adjust mounting screws.
Washer leaks Washer is not level Adjust leveling feet.
Door not sealing Adjust door latch.
Tank gasket loose Check gasket and correct.
Split fill tube Replace fill tube.