![Labconco 44000 Series User Manual Download Page 24](http://html1.mh-extra.com/html/labconco/44000-series/44000-series_user-manual_3172371024.webp)
Chapter 2: Prerequisites
Chapter 3: Getting Started
P#o%&ct Se#+ice -./00.122.341/
20
Centering the Washer Door
When the washer is level, check the operation of the
washer door for alignment with the washer tank. If the
door is not centered in the opening, you must center the
door by adjusting the corresponding leveling foot. PFor
example, if the door hits the right side of the tank, raise the
right front corner of the washer. If the door hits the left
side of the tank, raise the left front corner of the washer.Q
Attaching the Washer to the
Countertop
If you have an Undercounter 5lassware Washer, two
screws have been provided to attach the front of the
washer to the underside of the countertop or worksurface.
After the washer is leveled in its final position and the
washer door is properly centered, install the two screws as
shown in Figure 3-6 to stabilize the unit and prevent it
from moving.
U
U
Insert the
screws through
the holes in the
clips in the
front corners of
the washer and
secure the
screws to the
countertop.
Figure 3-6
Summary of Contents for 44000 Series
